GEEKTC GK-25 liquid metal thermal paste is a pure metal paste like thermal interface material. With ultra-high thermal conductivity and stability that surpasses traditional thermal interface materials,and high thermally conductive efficiency. Widely used for heat dissipation of electronic devices in high temperature and high heat flux scenarios.
————————————————
Attention:
The liquid metal is electric conductive, corrodes aluminum and its alloys.Please ensure proper protection and do not use without relecant knowledge. It is recommended as a replacement for original liquid metal on laptops.
————————————————
Method of Application:
1. Clean the surface of the substrate which to be coated,with a 25-30% concentration edible soda(Sodium Carbonate) aqueous solution to remove dust, rust and oil stains;
2. Wipe the surface of the substrate clean with high-purity ethanol;
3. Wipe the surface dry with a dust-free cloth;
4. Take an appropriate amount of liquid metal and place it on the surface of the substrate;
5. Use cotton swabs or soft bristle brushes to evenly coat the liquid metal, resulting in a mirror like surface effect;
6. The ambient temperature during coating is greater than 20℃.
————————————————
Precautions of Use:
1. Strong corrosiveness to aluminum and its alloys at room temperature, avoid contact with such compenents;
2. Long term high temperature also has varying levels of corrosiveness to other metal materials, and anti-corrosion treatment such as nickel plating is needed on the metal surface;
3. If the product solidifies at low temperature, please place it in an enviroment of 25℃ and wait for it to completely melt before use;
4. Before and after use, please seal it promptly and store it away from light;
5. After coating, if it comes into contact with air and moisture, an oxide film will form on the surface. It is necessary to gently remove the surface oxide film before install heat sink.